Creating Private Nameservers With DirectNIC

If you registered a domain with directNIC, you can register nameservers associated with the domain. You need to make sure the IP address is static and valid.

To register your own nameserver:
1. Click on Domain Manager and click the Change nameserver information icon next to the domain desired,
2. Click on the Create Nameserver link at the top of the page,
3. Enter your hostname and IP address for the nameserver and click Create Nameserver.

Warning, this page will create an actual nameserver for which advanced configuration and software is required at the ip address of the computer. Do not create a nameserver unless software has already been installed to run the nameserver.

To modify name server:
1. Go through the above step 1, 2, 3,
2. Click on "Modify" link to the right of the nameserver and then replace the old IP with your new IP address,
3. Click on "Modify Nameserver" button and submit the change.

The change should be propagated through the Internet within 48 hours. You need to resubmit the nameserver change for all the domains using the nameserver you modified.

IP address stands for Internet Protocol, this is the number your server or computer is assigned by the network you are on (

FQDN stands for Fully Qualified Domain Name which, essentially is the nameserver itself (

Basically, when registering a nameserver you are associating your FQDN with the IP for your server in the Global Registry,

Add Feedback